Explosive-proof one beam laser beam detector
Model：XD-A50/100/200/300/400/500ib
Laser wave length：650nm,808nm,980nm
Alert distance：0-500m
Alarm mode：beam blocking alarm
Protection level：IP67
1.XD-A***ib series laser intrusion detector adopts single-layer bijection structure, with a single beam as the alert line,and a pair of detectors as the alert unit. 2.It is capable of continuous laying out and linking other equipment such as lighting device, alarming device, camera, etc. through alarm host. 3.XD-A**ib series intrinsically safe type three beam laser intrusion detector has strong ability to resist cold and heat, electromagnetic radiation, interference of miscellaneous lights and could adapt to rough weather of wind, rain, dust, frost, etc., thus being suitable for perimeter areas with higher alert rate requirements.
- Product introduction
Function instruction
1.XD-A***ib series laser intrusion detector adopts single-layer bijection structure, with a single beam as the alert line,and a pair of detectors as the alert unit.
2.It is capable of continuous laying out and linking other equipment such as lighting device, alarming device, camera, etc. through alarm host.
3.XD-A**ib series intrinsically safe type three beam laser intrusion detector has strong ability to resist cold and heat, electromagnetic radiation, interference of miscellaneous lights and could adapt to rough weather of wind, rain, dust, frost, etc., thus being suitable for perimeter areas with higher alert rate requirements.
Technical parameter
|
Item |
Technical indexes |
|
Model |
XD-A50/100/200/300/500ib |
|
Laser wave length |
650nm, 808nm, 980nm |
|
Alert distance |
0- 500m |
|
Alert level |
Single-layer alert |
|
Alarm mode |
Beam blocking alarm |
|
Working voltage |
DC12V±10% |
|
Working current: |
170mA when transmitting; 70mA when receiving (alarm) |
|
Alarm output mode |
Solid relay normally closed contact; contact capacity: DC24V/1A |
|
Angles at the transmitting and receiving ends |
Divergence angle: horizontal <3′ vertical <30′ Receiving angle: <10° |
|
Optical axis adjustment angle |
Horizontal ±15° Vertical ±15° (range adjustable.) |
|
Product dimension |
60mm (L) × 80mm (W) ×245mm (H) |
|
Chassis dimension |
110mm (L) × 130mm (W) ×2mm (H) |
|
Material |
Aluminum alloy |
|
Dimension of installation hole |
4 diameter 10 mm holes in even distribution |
|
Alarm time |
2s±1s (1-30s optional) |
|
Response time |
5ms-500ms (adjustable) |
|
Working environment temperature |
-40℃-70℃ |
|
Protection level |
IP67 |
|
Type of laser light source |
Type I safety laser light source, in Class I |
|
MTBF |
> 120,000h |
|
Explosive proof grade |
ExibmbIIBT4 Gb |
